load insensitive mixer rev. v3 SM4T17 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? lo 1 to 3400 mhz ? rf 1 to 3400 mhz ? if 1 to 2000 mhz ? lo drive: +17 dbm (nominal) ? insensitive to system mismatch ? high intercept: +24 dbm (typ.) ? +260c reflow compatible description the SM4T17 is a termination insensitive mixer, designed for use in military, wireless and test equipment applications. the design utilizes schottky bridge quad diodes , broadband ferrite baluns and internal loads to provide excellent per formance without degradation due to external vswr mismatches. environmental screening available to mil-std-883, mil-std-202 or mil-dtl-28837, consult factory. ordering information part number package SM4T17 surface mount electrical specifications: z 0 = 50 lo = +17 dbm (downconverter application only) parameter test conditions units typical guaranteed +25oc -40o to +85oc ssb conversion loss (max) fr = 0.005 to 1 ghz, fl = 0.005 to 1 ghz, fi = 0.001 to 0.5 ghz fr = 0.001 to 3 ghz, fl = 0.001 to 3 ghz, fi = 0.001 to 1.5 ghz fr = 0.001 to 3.4 ghz, fl = 0.001 to 3.4 ghz, fi = 0.001 to 2 ghz db db db 6.5 8.0 9.0 7.5 9.0 10.5 7.8 9.3 10.8 ssb noise figure db isolation, l to r (min) fl = 0.01 to 1.5 ghz fl = 0.01 to 3.4 ghz db db 40 30 35 25 34 24 isolation, l to i (min) fl = 0.01 to 1.5 ghz fl = 0.01 to 3.4 ghz db db 40 30 35 25 34 24 isolation, r to i (min) fr = 0.01 to 3.4 ghz db 25 1 db conversion comp. fl = +17 dbm dbm +13 input ip3 f r1 = 1.9 ghz @ 10 dbm, f r2 = 1.91ghz @ 10 dbm, fl = 2 ghz @ 17 dbm dbm +24 within 1 db of conversion loss product image
load insensitive mixer rev. v3 SM4T17 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. absolute maximum ratings parameter absolute maximum operating temperature -54oc to +100oc storage temperature -65oc to +100oc peak input power +27 dbm max @ +25oc +23 dbm max @ +100oc peak input current 50 ma dc outline drawing: surface mount * ? dimensions are inches (millimeters) 0. 015 (0.38) unless otherwise specified. weight: 2 grams (0.07 oz.) max.
|
